TOOLJOY offers double-ended screwdriver bits with matching cross-head tips or cross-head/slotted combinations, including 65 mm models. Buyers can explore sandblasted, nickel-plated, and bright chrome finishes, alongside styles with colored sleeves or contrasting rings.
This guide explains how to compare tip combinations, body designs, and finishes when selecting products for distribution or private label orders.
Double cross-head bits have a cross-head tip at each end. A PH2/PH2 configuration provides two PH2 driving ends and can suit repeated fastening with the same screw profile and size.
Cross-head/slotted bits combine a cross-head tip with a flat blade. This configuration provides two different driving profiles on one bit for tasks involving both screw types.
In an order specification, identify both ends individually. For a slotted tip, include the blade width and thickness. This avoids ambiguity when two products have a similar appearance but different tip dimensions.
TOOLJOY’s range includes designs with extended hexagonal center sections and reduced center sections. Some versions also feature colored sleeves or ring details.
Overall length and holder compatibility are separate considerations. A 65 mm bit must still seat correctly in the receiving tool, with the holder or chuck engaging the intended section.
During sample evaluation, check both orientations for correct insertion, retention, removal, and reversal. Also check that the exposed tip reaches the screw without interference from the holder or surrounding assembly.
For kits supplied with a holder, evaluate the bits and holder together. For replacement bits, provide the receiving interface dimensions or a reference sample where available.
The available finish references include matte, bright metallic, dark, copper-colored, and red appearances. The order specification should identify both the treatment and the required appearance.
| Surface Treatment | Sample Appearance | Purchasing Considerations |
| Sandblasted | Matte metallic surface with a fine texture | Texture,shade, and any additional protective treatment |
| Nickel plating | Silver metallic appearance | Plating specification, gloss, and coverage |
| Bright chrome plating | Bright, reflective surface | Brightness,coverage, and visible-surface acceptance criteria |
| Manganese phosphate | Dark surface | Treatment specification and supplementary |
| Black nickel plating | Dark metallic appearance | Plating specification, shade, and consistency |
| Acid copper plating | Copper-colored surface | Coverage and whether it is the final surface or part of a coating system |
| Red electrophoretic | Red surface | Color reference, coverage, and areas excluded from coating |
Lighting can change how a finish appears in photographs. Where appearance is important, use an approved physical sample as the reference.
Color alone does not identify the process: a black finish, for example, should be specified by its actual treatment. If corrosion resistance is required, include the relevant test method and acceptance criteria rather than relying on the finish name.
Private label specifications can include logo text, tip-size identification, colored sleeves, and contrasting rings. Record the position and appearance of each feature. Where colors identify sizes or configurations, use the same system on the product, packaging, and catalog.
Packaging quantities should refer clearly to physical bits. A pack of 10 double-ended bits contains 20 driving ends, but its main quantity remains “10 bits.”
For example, “10 × PH2/PH2 Double-Ended Bits, 65 mm” identifies the pack quantity, tip combination, and length. List any included holder or accessory separately.
A complete inquiry helps TOOLJOY review the requested configuration and provides a consistent basis for comparing quotations.
| Inquiry field | Information to provide |
| Tip configuration | Profile and size of End A and End B |
| Overall length | Required length in millimeters |
| Body and connection | Drawing, interface dimensions, or reference sample |
| Intended use | Manual screwdriver, drill driver, or impact driver |
| Material | Required material or a request dor available options |
| Surface treatment | Process name and appearance reference |
| Markings | Logo, size identification, colors, and positions |
| Auantity and packaging | Quantity by configuration, bits per pack, and packaging format |
For example, begin with “PH2/PH2, 65 mm, sandblasted finish”, then add the intended tool, connection requirements, material, quantity, and packaging details.
Send TOOLJOY your specifications and reference images to discuss available double-ended bit configurations, surface finishes, and private label options.
TOOLJOY offers cross-head/slotted combinations as well as double cross-head versions. Specify the profile and size of each end separately. For the slotted end, include the blade width and thickness.
No. Overall length alone does not establish compatibility. Check the connection dimensions, insertion depth, and retention arrangement, then evaluate the bit in the intended holder in both orientations.
Available combinations depend on the selected model. Provide the tip configuration, body drawing or reference sample, and requested finish so TOOLJOY can review the combination.
No. Manganese phosphate and black nickel are different options that can produce dark appearances. Specify the actual process and use a reference sample to define the required appearance.
No. The double-ended configuration describes the arrangement of the tips. Impact suitability must be confirmed for the specific product and intended tool. Color, a reduced center section, or a sleeve does not establish suitability on its own.
Two ends provide two working tips, but they do not establish a fixed service-life improvement. Claims such as “twice the life” require comparative testing under defined conditions.
Hot News2026-11-20
2026-11-18
2026-11-13
2026-11-11
2026-10-28
2026-10-26